|
|
|
CONVERTER CARDSPI - 001 PARALLEL TO SDI CONVERTER WITH OPTIONAL EDH INSERTION INPUT Parallel multiplexed component signals to CCIR Rec 656. Note. To ease interfacing into equipment data is latched by the rising edge of the clock. Data Set up time 3 ns min to positive edge of clock Data hold time 2.5 ns min from positive edge of clock OUTPUT Serial digital 143,177, 270 & 360Mb/s NRZI No of Outputs: 3 off serial Output Impedance: 75 Ohms. Output return loss: >15dB 5 MHz to 270 MHz. EDH OPTIONIndications: EDH - Error detected Here (Note 1.) EDA - Error detected already (Note 1.) UES - Unknown Error status (Note 1.) Controls: Transmit/Receive Mode: (Note 2.) Bypass Mode: (Note 2.)
Note 1. These are accessible only through the serial interface SCL and SDA. Note 2. These are available only through the I/O interface see connector for details.
Mechanical DetailsThe following formats are available: Format A STD configuration with low profile pins and BNC connectors for outputs. Format B LOW profile pins and MCX connectors for outputs. Format C STAND-OFF configuration with BNC outputs. Connector Pinout
D0 to D9 Parallel Data Bus D0 LSB , D9 MSB CLK Parallel Data clock A0,A1 Address lines to modify I2c bus address. SCL,SDA I2c data and clock lines ID0,ID1,ID2 Card type identification code.
Card Type Identification code.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
FARA006
FARA6
FARA06
Faraday
Technology Limited
Croft Road Industrial Estate
Newcastle-under-Lyme
Staffordshire
England
ST5 0QZ
Telephone
: (+44) (0) 1782 661501
Facsimile : (+44) (0) 1782 630101
E-mail : sales@faradaytech.co.uk