FARADAY TECHNOLOGY LTD. PRESS RELEASE

HUM ( HUMBUCKERS ) ELIMINATOR

Faraday Technology's Ripple Eliminators ( Humbuckers )are designed to remove low frequency from video signals caused by differences in ground potential between circuits on different power systems. When multiple power panels are used in a building, different power loading by equipment and lighting causes small differences in ground potential which induce ground loop current flow which in turn create the 50Hz or 60Hz hum. Hum can also be created in long cable runs by electro magnetically induced currents.

FMRE-1HB Single Channel and FMRE-3HB Triple Channel Ripple Eliminators ( Humbuckers ) remove both these types of hum. They achieve up to 60dB of ripple reduction per channel depending on cable length, cable type, ground loop potential, and ground loop frequency.

FMRE's are broadcast quality products, and can be inserted anywhere in the transmission systems, but are most effective at or near the end of the cable run, should the hum problem be particularly bad, a second ripple eliminator channel can be added in series with negligible effect on the video signal.

For further information contact Sales on any of the following:-

Tel: +44 1782 661501  Fax: +44 1782 630101 Email: sales@faradaytech.co.uk